Description
Dental Handpiece Maintenance Oil System
Features:
Economical, efficient and time-saving.
It is able to ensure the cleaning and refueling of dental handpieces.
Three handpiceds can be cleaned and lubricated simultaneously keeping your hands clean.
The use of dental handpiece can improve the maintenance drive 40% of life.
It can clean and refuel three dental handpieces at the same time (two pc high speed and one pc low speed).
After finishing the cleaning and fuel injection, press “Air” button to remove the excess residual oil inside the dental handpieces.
Smart working mode aovid setting the oiling time every time.
Parameters:
Voltage Rating: AC110V/220V, 50Hz/60Hz
Air Pressure: 4kg/cm² – 8kg/cm²
Rated power: 40W
Can Volume: 300ml
Working temperature: 5℃ – 40℃
Size:300×230×360mm
Handpiece
Features:
1. E-generator LED handpiece
2. Silver cartridge
3. Professional LED light source, superior brightness, longevity 10000 hours
4. Unique electric generator, just a little air can generate sufficient power
5. Self-illumination without connecting circuit
6. Perfect stable and reliable performance
7. Push button cartridge
8. 135°C Autoclavable
9. Triple water spray, more ideal cleaning effect
10. High-grade material with a stylish design
11. Warranty: one year for handle; six months for cartridge
Technical parameter :
1. Head: torque large head
2. Air pressure at the back end of HP: 250KPa–300KPa(300KPa preferred)
3. Air pressure at the gauge in the dental unit: 277-316 KPa (2.8-3.2 kgf/cm2)
4. Water pressure :198Kpa (2 kg)
5. Rotation speed:300,000-450,000 rpm
6. Head hight:14.5 mm( standard )
7. Head diametre:φ12.5 mm( torque ) φ11.2 mm( standard )
8. Chuck type:push button
9. Bur applicable:φ1.59mm~φ1.6mm×21mm~23mm (diameter×length)
10. NOISE:≤60dB
1. Head: Large head
2. Air pressure at the back end of HP:200KPa–300KPa (300KPa preferred)
3. Air pressure at the gauge in the dental unit:277-316 KPa(2.8-3.2 kgf/cm2)
4. Water pressure:198Kpa (2 kg)
5. Rotation speed:280,000-350,000 rpm
6. Head hight:14.5 mm( standard )
7. Head dimmetre:φ12.5 mm( torque ) φ11.2 mm( standard )
8. Chuck type:Push Button
9. Bur applicable:φ1.595mm~φ1.6mm×21mm~23mm (diameter×length)
10. NOISE:≤60dB
Contra angle handpiece
– Low Speed 22,000-27,000 rpm.
– The shank of the instrument mounted therein is 2.35 mm
– Fastening of the instruments with a turning latch
– Autoclavable 135°C
– For any lab or E-type motors
Straight Nose cone
– Working pressure: 0.3MPa (4-hole);
– 0.25MPa (4-hole) (Measure meter is installed at the end of air motor to measure the air pressure).
– Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
– Noise: ≤68dB
– Air consumption: about 56L/min
– Ratio: 1:1
– Max speed of contra angle: 25000rpm/min.
Air Mortor
– Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
– 1:1 Direct Drive
– 4 holes
– Max speed 20,000 min-1
Packing list:
1×Main unit
2xHigh speed handpiece
1xlow speed handpiece set
1×Blow-off pipe
1×Product manual
