Description
HL-YMC I Alginate Impression Gypsum Blender Dental Impression Blender
Zhongrun Impression Blender
SKU
260092 EU
260093 US
Specification
Name: impression mixer
Model: HL-YMC Ⅰ
Power: Voltage 220V ± 10%, 50HZ ± 1Hz
Power consumption: 45W
Volume: 0.1CBM
Weight: 2.5kg
Certification: CE, ISO13485
Set the mixing time: According to various alginate printing material manufacturers instructions set
Machine Category: Electrical Class Ⅱ B type, ordinary equipment, non-AP or APG equipment, continuous operation.
Use life: 5 years.
Package
1 * alginate electric mixer
1 * rubber bowl
1 * knife
2 * fuse core 0.5A Φ5 × 20
1 * User Manual
1 * certificate (with alginate electric mixer at the bottom)
1 * warranty card
Instructions
1. The cleaning and disinfecting mixing bowl buckle into the tray, and then turn clockwise to lock.
2. Plug the power plug into a power outlet with a grounding wire and press ⑥ rocker switch to turn on the power.
3. The first water and alginate impression material into a mixing bowl according to a certain percentage of the crude tune into bulk (can be used alginate printing material in the ratio of instructions).
4. The knife into the mixture, press the start button ⑩, start low-speed rotation (low speed water and powder is not easy to spill), the knife will be along the bowl along the bowl along the direction of rotation of the bowl back and forth movement.
5. Press the start button ⑩ again, start high-speed rotation, the knife must be along the bowl along the bowl to move back and forth in the direction of rotation, which will help stirring effect; 20 seconds after the alarm light flashes, after every 5 seconds a beep to remind the user is desirable Under the impression material.
6. Press the stop key ⑾ and the mixer stops rotating. With the knife along the bowl scraping stir good impression material can be used clinically.
7. Turn the mixing bowl counterclockwise and remove the mixing bowl upward to clean it.