Feugiat nulla facilisis at vero eros et curt accumsan et iusto odio dignissim qui blandit praesent luptatum zzril.
+ (123) 1800-453-1546

Related Posts

Welcome to MedicalPress a Premium Medical Theme
Title Image


Home  /  Shop  /  Dental Instruments, Dental Instruments  /  Dental Alginate Impression Amalgamators Gypsum Blender Impression Mixer 110/220V

Dental Alginate Impression Amalgamators Gypsum Blender Impression Mixer 110/220V



2 speed styles: low speed 120rpm, high speed 250rpm

After 20 seconds, automatic alarm to remind users to use in the best condition

Card slot user-friendly design makes mixing bowl easier to disassemble

High wear-resistant rubber mixing bowl, using an upgraded version of the metal at the end

Metal knife to make mixing more uniform, effort, bring you a new experience

100 in stock


HL-YMC I Alginate Impression Gypsum Blender Dental Impression Blender

Zhongrun Impression Blender


260092 EU

260093 US


Name: impression mixer

Model: HL-YMC Ⅰ

Power: Voltage 220V ± 10%, 50HZ ± 1Hz

Power consumption: 45W

Volume: 0.1CBM

Weight: 2.5kg

Certification: CE, ISO13485

Set the mixing time: According to various alginate printing material manufacturers instructions set

Machine Category: Electrical Class Ⅱ B type, ordinary equipment, non-AP or APG equipment, continuous operation.

Use life: 5 years.


1 * alginate electric mixer

1 * rubber bowl

1 * knife

2 * fuse core 0.5A Φ5 × 20

1 * User Manual

1 * certificate (with alginate electric mixer at the bottom)

1 * warranty card


1. The cleaning and disinfecting mixing bowl buckle into the tray, and then turn clockwise to lock.

2. Plug the power plug into a power outlet with a grounding wire and press ⑥ rocker switch to turn on the power.

3. The first water and alginate impression material into a mixing bowl according to a certain percentage of the crude tune into bulk (can be used alginate printing material in the ratio of instructions).

4. The knife into the mixture, press the start button ⑩, start low-speed rotation (low speed water and powder is not easy to spill), the knife will be along the bowl along the bowl along the direction of rotation of the bowl back and forth movement.

5. Press the start button ⑩ again, start high-speed rotation, the knife must be along the bowl along the bowl to move back and forth in the direction of rotation, which will help stirring effect; 20 seconds after the alarm light flashes, after every 5 seconds a beep to remind the user is desirable Under the impression material.

6. Press the stop key ⑾ and the mixer stops rotating. With the knife along the bowl scraping stir good impression material can be used clinically.

7. Turn the mixing bowl counterclockwise and remove the mixing bowl upward to clean it.