EX-203C Kit M4S
Included: Contra angle
Air Motor 2Hole
– E-type connector
– Wrench type
– Precise technology, Steady, no vibration while revolving, offering a steady operation.
– Suitable for any E-type handpiece accords with ISO standard
– 135°C Autoclavable, suitable for both steam and chemical autoclave
Air Motor EX-203:
– Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
– 1:1 Direct Drive
– Borden 4 holes
– Max speed 20,000 min-1
Contra angle handpiece:
– Low Speed 22,000-27,000 rpm.
– The shank of the instrument mounted therein is 2.35 mm
– Fastening of the instruments with a turning latch
– Autoclavable 135°C
– For any lab or E-type motors
– Working pressure: 0.3MPa
– 0.25MPa(Measure meter is installed at the end of air motor to measure the air pressure).
– Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
– Noise: ≤68dB
– Air consumption: about 56L/min
– Ratio: 1:1
– Max speed of contra angle: 25000rpm/min.
The sale of this item may be subject to regulation by the U.S.Food and Drug Administration and state and local regulatory agencies.
If so, do not bid on this item unless you are an authorized purchaser.
If the item is subject to FDA regulation,we will verify your status as an authorized purchaser of this item before shipping of the item.
All of our products are CE approved. Please kindly check the copy of the certificate in the listing below.
Please find out as much as you can about your import taxes in your own country before bidding the item.
You need to pay for the import duties in case that occurred for certain goods,
or you may kindly give us some suggestions about that, we promise to do our best to help you!