Feugiat nulla facilisis at vero eros et curt accumsan et iusto odio dignissim qui blandit praesent luptatum zzril.
+ (123) 1800-453-1546
info@example.com

Related Posts

Welcome to MedicalPress a Premium Medical Theme
ArabicEnglishFrenchGermanItalianJapaneseKoreanRussianSpanish
Title Image

Shop

Home  /  Shop  /  Dental Tools  /  Lab Pro Cleaning Air Water Dental Prophy Polishing Sandblasting Machine 4 Hole
SALE

Lab Pro Cleaning Air Water Dental Prophy Polishing Sandblasting Machine 4 Hole

$179.98

1.Within the range of usable 3-6KG,adjusted by
the pressure switch on the treatment machine.
2.Foot switch control from the start teeth cleaning
and sandblasting machine stops working.

1000 in stock

Description

Description:

Features:
A compact, lightweight body with total gas switch, easy to operate.
The air filtering device (sandblasting tank) can completely prevent moisture, oil and gas blocks forming powder into the handle or pipe blast.
The use of water, gas, powder removing smoke stains, tartar, color stains, plaque, and without prejudice to the gums.
The work can not be in direct contact with the handle portion of the teeth and gums.
Air tube separate from water tube,never mixture.
Tip can be disassemble and clean.
Anti-retraction system.
Specification:
Connect type: 4-hole handpiece tube
Air pressure:
1.Within the range of usable 3-6KG, adjusted by the pressure switch on the treatment machine.
2.Foot switch control from the start teeth cleaning and sandblasting machine stops working.
Water pressure: pressure can be used in more than 0.5KG
Weight:1.5kg
Instructions For Use:
1.The blast pot and cover:
A)will turn on the lid, pour in the tank blasting powder to below the green line (no more than 1/3 of the height of the can) and then tighten lids
B) Do not over-blasting powder 1/2 tank height, so as to avoid congestion
C) the inside of the lid with the filter, take care that it can not deform
2. Drainage gas button (Drain): Before each use, press the button three times
to drain gas emission filter cup gouache, powder drier.
3. The amount of powder knob (Air value): clockwise adjustment
4. Water knob (Water value): according to the actual work needs to be adjusted
5. blasting switch:
the blasting switch according to the “ON” position, the foot switch blasting powder ejected from the nozzle handle; “OFF” to close blast switch
B) After each use, pull the blasting switch to “OFF” position, then step on the foot switch several times, the purpose is to purge the pipe more than powder, to avoid clogging when using the next
6. Main Connector:After high or low discharge screw connected to the host machine’s four-hole joints treatment